Max 2200 and 1500 Sliding Gate Operators

Max 2200 and 1500 Sliding Gate Operators

A gate opening capacity of 2200 and 1500lbs, competitive pricing, and numerous safety and security features makes the Max 2200 and 1500 sliding gate operators the ideal choice for high-traffic commercial use. These two modular gate operators are designed to allow for easy access for any needed servicing or maintenance.  The Max 2200 and 1500 are compatible with existing installations and can be secured easily on top of the concrete pads of most entry gates, allowing for an easy and convenient setup.

  • Max 2200 & 1500 Mechanical Specifications

    • Max 2200 & Max 1500 dimensions (18.3”W x 24.5” D x 21.3” H) 18.5”
      arm height
    • Heavy duty direct drive gear box 30:1 Size 60 for Max 2200; Size 50 for Max 1500 with constant lubrication using special gear oil
    • Max 2200 capacity 2200lbs /60ft long gate speed
    • Max 1500 capacity 1500lbs /50ft long gate speed
    • 12 inch per second direct drive (no belts, or pulleys) with selectable speed control
    • Electrical manual gate release functions via built-in jog switch with optional chain drop device
    • Gold zinc corrosion protection
    • Shipping weight of Max Slide Gate Operators: 2200 (158 lbs), 1500 (152 lbs)
    • Continuous Cycle at extreme temperature range. No overheating possibility
    • Intelligent ramp-up and ramp-down gate speed control for smooth operation
    • Easy access control panel door for service
    • Each Max 2200 & Max 1500 includes a 25ft #40 nickel plated chain (Dual package includes 2 x 25ft #40 nickel plated chain)
  • Max 2200 & 1500 Security Specifications

    • High traffic intuitive loop managements system for better security
    • Advanced security features with built-in audible and remote alarms
    • Magnetic lock control relay outputs with selectable delay times
    • Tamper alert relay outputs triggered “on” if there is an unauthorized chain drop
    • Audible alarm if gate is tampered with or ERD is triggered for higher security
    • Gate partial open recorder. Programmable inputs allow partial open cycles (13 or greater gate openings) for high traffic gates while providing complete open cycles for emergency vehicles
    • Lockable cover with key lock release to prevent intruders and vandals
    • Gate disable feature disables all inputs with exception of the fire department input for higher security
    • Built-in transaction buffer for higher security
    • Gate status outputs for gate monitoring
    • Direct motor control of jog OPEN/CLOSE for manually moving a gate in case of emergency
    • Advanced anti-tailgate features to provide higher security
    • No need for magnetic lock with the direct drive and magnetic dynamic brake system
    • Built-in chain drop sensor detects unauthorized chain dropping
    • Gate push back protection for higher security using 30:1 gear reducer and dynamic brake system makes unauthorized entry impossible and maglocks unneccessary
  • Max 2200 & 1500 Safety Specifications

    • Adaptive obstruction sensor for much better gate safety system. 16 selectable sensitivity settings
    • Built-in UL buzzer reset
    • UL 325/991 compliant Class I, II, III, and IV. CSA approved
    • Magnetic dynamic brake system stops the gate immediately to prevent damage to obstructions.
    • Built-in advanced entrapment protection and alarm output
    • Built-in gate-in-motion alarm for industrial applications

What are the mechanical specification features of the Max 2200 and 1500?

Both gate operators are incredibly durable. Both the Max 2200 and 1500 feature cold-rolled steel frames and gold zinc-treated steel chasses. Due to the synthetic oil baths and high-speed ball bearing, you’ll never need to be concerned with the gear reducer not performing even under extreme temperatures. More noteworthy mechanical specifications include:

  • Electrical manual gate release functions and optional chain drop device
  • 2200lbs/60ft long and 1500lbs/50ft long gate capacity respectively
  • 12 inch/second direct drive with selectable speed control means no belts or pulleys
  • Robust measurements: 24.5 in. D x 18.3 in. W x 21.3 in. H with an arm height of 18.5 in.

 

Can the security features on these gate operators be customized?

The wide array of built-in and mechanical security features available on both the Max 2200 and 1500 allow you to customize the level of security depending on your unique needs. Observe traffic with a built-in transaction buffer, choose from several built-in and remote alarms or customize the delay timing on the magnetic lock control relay outputs. The partial open recorder on the gate even allows for programmable inputs, meaning you have the ability to choose between 13 or more gate opening cycles.

Why choose a sliding gate operator with direct gear drive?

Gate operators that run via belts, pulleys, or chains are much more likely to jam compared to direct gear drive operators. Direct gear drive operators ensure dependable mechanical operation, reduce potential service costs and provide protection from obstructions and impacts with precise sensing technology.

Are You Ready to Get Started on Your Austin Fence Project?

Call Viking Fence Today and Get Your FREE No Hassle Estimate from Your Austin Fence Company. GET STARTED